Ranger Pumps

Ranger, Inc. manufactures a precision built helical gear pump for industrial applications. The capacity range is available from 25 GPM to 360 GPM and pressures to 125 PSI.

Ranger, Inc., located in Eads, TN, USA, has been producing quality pumps and parts since 1989. Ranger Pumps are designed to use as low speed pumps for both low and high viscosity liquids. Viscosities upward to 1,000,000 SSU (200,000 CP) can be pumped. Ranger pumps sizes are 2", 2-1/2", 3" & 4" in size. Flows are 20 GPM to 360 GPM with pressure capabilities to 125 PSI (862 KPA). Ranger also has Basket-Type Line Strainers & Foot Mounted Gear Reducers available.

How to Identify


Ranger Brochure PDF

Series 119

  • Up to 77 GPM
  • Requires 7.9 HP

Series 119 Mounting Dimensions PDF

Series 179

  • Up to 118 GPM
  • Requires 12.1 HP

Series 179 Mounting Dimensions PDF

Series 228 and 229

  • Up to 154 GPM
  • Requires 15.4 HP

Series 228 Mounting Dimensions PDF
Series 229 Mounting Dimensions PDF

Series 489

  • Up to 358 GPM
  • Requires 35.3 HP

Series 489 Mounting Dimensions PDF

Reduction Gears

This series of Ranger pumps is designed to operate at reduced motor speeds. This allows the pump to operate equally well for both high and low viscosity liquids. Low pump speeds also increase pump life.
The gear box has three interchangeable ratios that fit the 11, 17, and 22 Series pumps.

  • 4.60:1
  • 3.94:1
  • 3.20:1

Replacement Parts

  • Bronze or Carbon replacement bushings
  • Graphite or Teflon packings
  • Gaskets
  • Replacement Bearings
  • Packing Glands
  • Replacement Shafts

Quad seal upgrade PDF
119-228 series breakdown PDF